Contact us

Contact us
General Inquiry info@iiw2014.com
Registration register@iiw2014.com
International Conference(IC) ic@iiw2014.com
Accommodation hotel@iiw2014.com
Tour tour@iiw2014.com
Exhibition exhibition@iiw2014.com
Sponsorship sponsor@iiw2014.com
PR pr@iiw2014.com
Social Event socialevent@iiw2014.com

IIW 2014

The 67th IIW Annual Assembly & International Conference

Poster Presentation

Thursday, July 17 ㅣ 17:40-18:30
Room: Studio (2F)

Heavy industries

H1. CHARACTERIZATION OF ABNORMAL MICROSTRUCTURE AT THELINEAR FRICTION WELDED Ti-6.5Al-3.5Mo-1.5Zr-0.3Si TITANIUM ALLOY JOINT Juandi Suo1, Wenya Li1, Tiejun Ma1, KeeHyun Kim2
1State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, P.R. China
2School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, UK

H2. MICROSTRUCTURAL STUDY OF TRIAL WELD JOINTS DESIGNED FOR WELDING OF STEAM TURBINE ROTORS Dagmar Jandová, Josef Kasl
Research and Testing Institute Plzeň, Ltd., the Czech Republic

H3. TESTING OF DISSIMILAR WELD JOINT OF STEELS COST FB2 AND COST F Josef Kasl, Dagmar Jandová
Research and Testing Institute Plzeň, Ltd., the Czech Republic

H4. A STUDY ON THE RELIABILITY-BASED MAINTENANCE OF WELDED 3-PIECE BOGIE Sung Kyou Choi, Industry-Academic Cooperation, Korea National University of Transportation, Korea, South

H5. JOINING OF W TO FERRITIC-MARTENSITIC STEEL USING HOT ISOSTATIC PRESSING Yang-Il Jung1, Jeong-Yong Park, Byoung-Kwon Choi, Byun-Young Chung, Dong Won Lee, Seungyon Cho2
1Korea Atomic Energy Research Institute, Daedeok-daero, Yuseong-gu, Daejeon, Republic of Korea
2National Fusion Research Institute, Gwahangno, Yuseong, Daejeon, Republic of Korea

H6. A STUDY ON THE EFFECTS OF THE PROJECTED WIRE LENGTH Juho Han, Kwanghoon Lee, Jinoh Yun, Jeongsoo Lee
Industrial R&D Team Technology Research Institute, Hanjin Heavy Industries & Construction-Total Marine Services CO.,LTD, South Korea

H7. THE EFFECT OF HEAT INPUT ON MICROSTRUCTURE AND PROPERTIES OF HEAT AFFECTED ZONE FOR CT90 COILED TUBING Yue Wu, Kai SHI, Xiao LI, Yanming LIU, Hongduo Wang
Key Laboratory of Materia Processing Engineering, Xi’an Shiyou University, China

H8. FIELD TUBE TO TUBE BUTT WELDING PROCEDURE FOR COILED TUBING Yanming LIU, Kai SHI, Hongduo Wang, Xiao LI,
Key Laboratory of Material Processing Engineering, Xi’an Shiyou University, China

H9. WELDING THERMAL ACCUMULATION DURING BUTT-WELDING OF COILED TUBING Xiao LI1, Kai SHI1, Yanming LIU1, Hongduo Wang1, Qing Guo2
1Key Laboratory of Materia1 Processing Engineering, Xi’an Shiyou University, China
2Dept. of Geology, China University of Petroleum, Beijing, China

H10. 1 YEAR OF INNOVATION WITH THE ORIGINATOR OF 100% VIRTUAL REALITY WELDER TRAINER Claude Choquet
123 Certification Inc., CEO & Founder, Canada

H11. AUTOMATION TECHNOLOGY ( ROBOT ) FOR QUALITY WELDING Itinder Singh Hora
MANUFACTURING ENGINEERING, CASE NEW HOLLAND, India

H12. MICROSTRUCTURE AND PROPERTY OF THE AL5ZN2MG-T5 ALUMINUM ALLOY MIG WELDING JOINT Shanglei Yang, Ni Weiyuan, Tuo Wenhai, Zhang Dongmei
Shanghai University of Engineering Science, Shanghai 201620, China

H13. NUMERICAL ANALYSIS IN DISSIMILAR MATERIALS WELDING; QUANTIFICATIONS OF TEMPERATURE, STRESS, AND STRAIN Wontae Kim1, Shrestha Ranjit1, Heesang Park2 and Jeonghak Park3
1Dept. of Mechanical Engineering, Kongju National University, Cheonan, Korea
2Technology development team, Korea Research Institute of Smart Material and Structures System Association, Daejeon, Korea
3Safety measurement center, Korea Research Institute of Standards and Science, Daejeon, Korea

H14. NUCLEAR POWER PLANT CRDM NOZZLE WELD INSPECTION BY INTERFACE WAVE Jaesun Lee1, Junpil Park1, Younho Cho2, Keun-Bae Park3, Hyunh Huh3, Dong-Ok Kim3
1Graduate school, School of Mechanical Engineering, Pusan National University, Pusan, South Korea
2School of Mechanical Engineering, Pusan National University, Pusan, South Korea
3Korea Atomic Energy Research Institute, Daejeon, South Korea

H15. A MODELING STUDY ON CRDM NOZZLE WELD INSPECTION SIGNAL FOR NUCLEAR POWER PLANT Junpil Park1, Jaesun Lee1, Euywon Jung1, Younho Cho2, Keun-Bae Park3, Hyunh Huh3, Dong-Ok Kim3
1Graduate school, School of Mechanical Engineering, Pusan National University, Pusan, South Korea
2School of Mechanical Engineering, Pusan National University, Pusan, South Korea
3Korea Atomic Energy Research Institute, Daejeon, South Korea

H16. SMALL BORE PIPE SOCKET WELD INSPECTION USING PHASED ARRAY ULTRASONIC INSPECTION IN KOREAN NPP Byungsik Yoon, Yongsik KIM and Jeongseok LEE
KHNP Central Research Institute, Yuseongdaero Yuseong-gu, Daejeon, Korea

H17. PHASED ARRAY SIMULATION FOR EVALUATION OF WELD IN OFFSHORE CHAIN Jeong-Ki, Lee, Dong Woon, Yang, Yi-gon, Kim
Innovation Center for Safety Diagnosis Technology of Heavy & Chemical Facilities, Chonnam National University, Korea

H18, THE STATUS OF ECT SYSTEM FOR RAON's CAVITIES
- 1. ECT EQUIPMENT AND STANDARD SAMPLE –
Mijoung Joung, Yoochul Jung, Jongdae Joo, Hyungjim Kim
IBS(Institute for Basic Science), Korea

H19. A STUDY ON STRESS DISTRIBUTION OF TENSILE LOAD ON WELDED SPECIMENS USING INFRARED THERMOGRAPHY Man Yong Choi1, Hee Sang Park2, Jeong Hak Park1, Won Tae Kim3
1Safety measurement center, Korea research Institute of Standards and Science, Daejeon, Korea,
2Development of department Korea Research Institute of Smart Material and Structures System Association, Daejeon, Korea
3Department of Mechanical Engineering, Kongju National University, Cheonan, Korea

H20. EVALUATION OF RESIDUAL STRESS IN THE WELDED JOINT METAL WITH APPLIED WELDING CURRENT BY SCANNING ACOUSTIC MICROSCOPY Seon Hee Kim1, Ik Keun Park1, Kyoung Suk Kim2, Judith A. Todd3, Richard L. Tutwiler3
1Dept. of Mechanical Engineering, Seoul National University of Science & Technology, Korea
2Dept. of Mechanical Design Engineering, Chosun University, Korea
3The Pennsylvania State University, USA

H21. STUDY ON THE MECHANICAL PROPERTIES OF PWHT CONDITION OF WELDED REGION AT SAW OF 1.25CR-0.5MO STEEL FOR PRESSURE VESSEL Jun-Seok Seo1, Jung-Ki Han1, Jong-Man Han1, Dong-Mi Jang1, Tae-Hoon Roh2
1Technical Research Center, HYUNDAI STEEL, Korea, 2Technical Research Center, KISWEL, Korea

H22. WC PARTICLES REINFORCED IRON-BASED WEAR-RESISTANT COMPOSITE BY ARC DEPOSITION ADDITIVE MANUFACTURING Liu Zhenying, Zhang Li
Beijing ARC Xinxing Science and Technology Co., Ltd, Beijing, China

Automotive industries

A1. A STUDY ON THE MECHANICAL PROPERTIES OF AL/CU MAGNETIC PULSE TUBULAR WELDMENT ACCORDING TO THE CHARGED VOLTAGE B.Y. Kang, J.Y. Shim, I.B. Kim
Convergence components and agricultural machinery application center, Korea institute of industrial technology, Jeonbuk 838-11, Korea

A2. OPTIMIZATION OF ND: YAG LASER-MIG HYBRID WELDING PARAMETERS ON GALVANIZED STEEL (SGACC60) VIA GREY-BASED TAGUCHI ANALYSIS Jun-Ui Han1, Byung-Ho Ahn2, Jeong-Hoon Baek3, Han-Sur Bang4, Hee-Seon Bang4
1Dept. of naval architecture & ocean engineering, Graduate School, Chosun University, Korea
2Technical research laboratories & Gwang Il Machine, Korea
3Dept. of management, Graduate School, Chosun University, Korea
4Dept. of welding & joining science engineering, Chosun University, Korea

A3. EFFECT OF ZINC‐COATING ON INTERFACIAL MICROSTRUCTURE FOR ALSI5/GALVANIZED STEEL SHEET TIG BRAZING YU Zhishui1, LI Ruifeng2, ZHANG Peilei1, QIN Youqiong1
1School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, China
2School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang Jiangsu, P. R. China

A4. EFFECT OF REMELTING SCANNING SPEED ON GLASS FORMING ABILITY OF NI-BASED ALLOY USING LASER CLADDING PLUS LASER REMELTING PROCESS Ruifeng Li1, Zhuguo Li2, Yanyan Zhu2
1School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang Jiangsu, People’s Republic of China
2Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, Shanghai, People’s Republic of China

A5. FRACTURE BEHAVIOR OF WELDBOND JOINT OF 1.2GPA GRADE ULTRA HIGH STRENGTH STEEL FOR CAR BODY APPLICATIONS Jong-Dae Lee1,2, Eun-taek Jeong1,2, Mok-Soon Kim2, Jun-Ki Kim1
1Advanced Welding & Joining R&BD Group / Micro-joining Center, KITHCH
2School of Materials Science and Engineering, Inha University, Incheon 402-751, Korea

A6. Microstructure and mechanical properties of friction stir processed SM45C steel Sang-Hyuk Kim1,2, Ram Song1,2, Kwang-Jin Lee1, Kee-Do Woo2
1Convergence components and agricultural machinery application center, Korea institute of industrial technology, Jeonbuk, Korea
2Division of Advanced Materials Science & Engineering, Chonbuk National University, Jeonbuk, Korea

A7. PULSED DOUBLE-ELECTRODE GMAW-BRAZING FOR JOINING OF ALUMINUM TO STEEL SHI Yu, ZHANG Gang, ZHU Ming and HUANG Jiankang
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, P. R. China

A8. THE INFLUENCE OF POST PROCESSING HEAT TREATMENT OF FRICTION-STIR-PROCESSED AA6082 SEAMED TUBE Kwang-jin Lee, Ram Song, Sang-hyuk Kim
Convergence Components & Agricultural Machinery Application Center, Korea Institute of Industrial Technology, Korea

A9. EFFECT OF PHASE TRANSFORMATION ON TENSILE DEFORMATION BEHAVIOR IN THE WELD HEAT-AFFECTED ZONE OF A NITROGEN-ALLOYED FE-18CR-10MN-N STAINLESS STEEL Min-ho Jang1, Joonoh Moon2, Tae-ho Lee2
1Div. of Mater. Sci. & Eng. ,Hanyang University, Korea, South
2Ferrous alloy department ,Korea Institute of Materials Science, Korea, South

A10. INFLUENCE OF WIRE FEEDING SPEED ON LASER BRAZING ZINC-COATED STEEL WITH CU-BASED FILLER METAL Zhang Peilei
School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, China

A11. RESIDUAL STRESS ANALYSIS FOR ENGINE BLOCK BY THE GROOVING METHOD Qinghua LU, Chong GUO, Birong Peng, Xiaofeng He
School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, China

A12. LASER ALLOYING OF MULTICARBIDES REINFORCED COMPOSITE COATINGS ON A DUCTILE IRON Hua Yan, Peilei Zhang , Chonggui Li , Zhishui Yu , Qinghua Lu
School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, China

A13. INVERTER DC RESISTANCE SPOT WELDABILITY OF UHSS GRADE SHEET USING A RING SHAPE ELECTRODE Insung Hwang, Hyunjun Yoon, Dongcheol Kim, Munjin Kang
Advanced Welding & Joining R&BD Group ,KITECH, Korea, South

A14. CHARACTERISTICS OF RESISTANCE SPOT WELDING FOR FE-MN-AL-C TWIP STEELS K. S. Son1,2, E. P. Kwon1, K. J. Lee1, K. W. Seol2
1Convergence Components & Agricultural Machinery Application Center, Korea Institute of Industrial Technology, South Korea
2Department of Metallugical engneering, Chonbuk national university, South Korea

A15. CHARACTERISTICS OF CO2 GAS-SHIELDED ARC WELDING FOR FE-MN-C AND FE-MN-SI-AL TWIP STEELS E. P. Kwon1, K. J. Lee2, K. S. Son1,2
1Convergence Components & Agricultural Machinery Application Center, Korea Institute of Industrial Technology, Jeonju, Republic of Korea
2Department of Metallurgical Engineering, Chonbuk National University, Republic of Korea

A16. EVALUATION OF NITROGEN INFLUENCE ON MICROSTRUCTURE OF DUPLEX STAINLESS STEEL LASER WELDS Jozef Barta1, Milan Maronek2, Miroslav Sahul1, Katarina Bartova1, Erika Hodulova1
1Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak University of Technology, Slovakia 2Institute of Production Technologies, Faculty of Materials Science and Technology, Slovak Universiity of Technology, Slovakia

A17. SOUNDNESS COMPARISON OF MIG WELDING METHODS FOR HIGH-STRENGTH GALVANIZED STEEL ACCORDING TO THE SHIELDING GAS COMPOSITION Young Cheol Jeong1, Chang-Je Lee2, Young Tae Cho1, Yoon Gyo Jung1
1Department of Mechanical Engineering, Changwon National University
2BEST F.A, Yeondeok-ro, 15 Beon-gil, Seongsan-gu, Changwon-si, Gyeongnam, Korea

A18. A STUDY ON THE CHARACTERISTICS OF TRANSITION CURRENT IN MAG WELDING USING INDIUM COATED SOLID WIRE Jae-seong Kim1, Ki-young Park1, Bo-young Lee2
1Center for Robot &Manufacturing, Institute for Advanced Engineering, Yongin, Gyeonggi-do, Korea
2School of Aerospace & Mechanical Engineering, Korea Aerospace University, Korea, South

A19. PULSED HYBRID LASER-ARC WELDING OF THIN SHEETS Jaroslav Bruncko1, Michal Simek2, Miroslav Michalka1, Matej Packo2, Andrej Vincze1, Frantisek Kolenic2
1International Laser Centre, Ilkovicova 3, Bratislava, Slovak Republic
2FIRST WELDING COMPANY, Kopcianska 14, Bratislava, Slovak Republic

A20. DEVELOPMENT OF MICROSTRUCTURE AND TEXTURE IN LINEAR FRICTION WELDED PURE TITANIUM Zhihan Zhang1, W.Y.Li1, X.Y.Wang1, S.S.Zhang1, G.D.Wen1, T.J.Ma1, A.Vairis2
1State Key Laboratory of Solidification Processing, Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi’an, Shaanxi, PR China
2Mechanical Engineering Department, TEI of Crete, Heraklion, Crete, Greece

A21. FRICTION STIR WELDING OF ALUMINUM ALLOYS Jaehyung Cho1, Won-jae Kim2, Chang-gil Lee3
1Light Metal Devision ,Korea Institute of Materials Science, Korea, South
2Light Metal Division ,Korea Institute of Materials Science, Korea, South
3Industrial Technology Support Division ,Korea Institute of Materials Science, Korea, South

Electronics industries

E1. JOINING TECHNOLOGY AND JOINT RELIABILITY BETWEEN FLEXIBLE SUBSTRATE AND SI CHIP WITH MICRO-BUMP Yong-Ho Ko 1, 2, Taek-Soo Kim2, Jung-Hwan Bang1, Chang-Woo Lee1
1Micro-joining Center, KITECH, Incheon, Korea
2Dept. of Mechanical Engineering, KAIST, Daejeon, Korea

E2. SN-AG-CU SOLDER JOINT ON ENIG AND ENEPIG WITH METAL TURN OVER(MTO) OF NI PLATING SOLUTION Kyoung-Ho Kim1, Wonil Seo1,2, Kang-Dong Kim3, Deok-Gon Han4, Tae-Hyun Sung4, Tae-Ho Lee4, Sehoon Yoo1,5
1Advanced Welding & Joining R&BD Group, KITECH, Korea
2Dept. of Advanced Materials Engineering, Inha University, Korea
3Qualify Innovation Group, Samsung Electro-Mechanics, Korea
4R&D Group, MK Chem & Tech, Korea
5Dept. of Electronic Packaging, University of Science and Technology, Korea

E3. STUDY ON DIFFUSION BONDING OF TIAL ALLOY TO TI3ALC2CERAMIC Jiakun Liu, JianCao, Jicai Feng
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, China

E4. JOINT PROPERTY OF SN-CU-CR(CA) MIDDLE TEMPERATURE SOLDER FOR HIGH RELIABILITY OF AUTOMOBILE ECU Junghwan Bang ,Dong-Yurl Yu, Yong-Ho Ko, Chang-Woo Lee
Micro-joining Center, KITECH, Incheon, Korea

E5. INTERFACIAL FRACTURE MECHANISM OF IGBT MODULE IN ELECTRONIC VEHICLE A young Kim1, Won sik Hong1, Young pyong Kim2, Dong-keun Jang2
1Components & Materials Physics Research Center ,Korea Electronics Technology Institute (KETI), Korea, South
2Power semiconductor Team ,LS Industrial Systems Co., Ltd, Korea, South

E6. AMORPHOUS FILLER METALS BASED ON TITANIUM FOR BRAZING OF ELECTRONICS O.N. Sevryukov1, V.T. Fedotov1, A.N. Suchkov2, I. V. Fedotov2, B.A. Kalin2
1MIFI-AMETO, Ltd, 2NRNU MEPhI, Moscow, Russian Federation

E7. DESIGN AND IMPLEMENTATION OF TEACHING DEVICE FOR WELDING OPERATING TECHNIQUE YE Jiehe1, DENG Xiaojun2, CUI hongju3, MENG Lichun4, HE Jianying5, SUN Xue6
CSR Qingdao Sifang Co.,Ltd., Qingdao, China

E8. INTERCONNECTION PROPERTIES OF CARBON NANOTUBE (CNT)-FILLED SOLDERABLE ISOTROPIC AND ANISOTROPIC CONDUCTIVE ADHESIVES Byung-seung Yim, Seung hoon Oh, Jeong il Lee, Byung hun Lee, Jong-min Kim
School of Mechanical Engineering, Chung-Ang University, Korea, South

E9. ROOM TEMPERATURE BONDING TECHNOLOGY WITH NANO-MULTILAYER Won-il Seo1, Yong-ki Cho2, Won-beom Lee2, Jeong-han Kim3, Mok-soon Kim4, Sehoon Yoo1
1Advanced Welding & Joining R&BD Group ,KITECH, Korea, South, 2Advanced Thermal Process Group ,KITECH, Korea, South, 3Root Technology Center ,KITECH, Korea, South, 4Dept of Advanced Materials Engineering ,Inha University, Korea, South

E10. PROCESS AND CHARACTERIZATION OF FUSED SILICA GLASS TO INVAR36 ALLOY LASER ASSISTED JOINING Dae jun Jung1, Deog gyu Lee1, Suck joo Na2, Seung hoon Lee1
1Division of Space Payload ,Korea Aerospace Research Institute, Korea, South
2Department of Mechanical Engineering ,Korea Advanced Institute of Science and Technology, Korea, South

E11. ADHESION IMPROVEMENT OF SILICON/UNDERFILL/POLYIMIDE INTERFACES BY UV/OZONE TREATMENT AND SOL-GEL DERIVED HYBRID LAYERS Sanwi Kim, Taek-Soo Kim
Department of Mechanical Engineering, KAIST, South Korea

E12. STUDY ON LASER SOLDERING TECHNOLOGY FOR CHIP PACKAGING Heeshin Kang, Jiwhan Noh, Jiyeon Choi
Laser and E-beam Application Group, Korea Institute of Machinery and Materials, Korea, South


Quick Menu